Watch how to use and maintain
1. Maintenance of common sense.

  (1) wear watches, the hands sweat on the case of corrosive, steel case because it is nickel-chromium alloy, better corrosion resistance, copper semi-steel case, long-term contacts with sweat, easy corrosion, should be often with a soft cloth wipe sweat or plastic table mat care to prevent the erosion of their sweat.
  (2) Do not open the table cover, so as not to affect the movement of dust into the watch work.
  (3) Do not watch on the wardrobe with mothballs, so as not to form the oil deterioration.
  (4) Do not watch on the radio, TV, in order to avoid magnetization.
  (5) long-term storage does not wear a watch, a winding should be monthly, so parts will not be long at rest, in order to ensure the operation of the printer performance.
  Rolex replica watches
  2. Table Mongolia renovation. Watch a lot of road pattern Mongolia was set aside after the first drop in 12 drops of the table covered with water, then squeeze a little toothpaste obliterated, you can draw lines removed leaving the watch-glass as new.
  Omega replica watches
  3. Remove the water table. Water within the case are not careful, the available granular material called silicone and has a watch with water into a sealed container for several hours, remove the watch, water is all gone. This method is simple and economic life of the meter accuracy and not have any damage. Has repeatedly after absorbing silica gel, dried at 120 ℃ for several hours, water absorption capacity of renewable, but also repeated use. 4. Wearing a luminous watch sleep well. To sleep on the watch worn on the wrist, if the watch is luminous watch, it will adversely affect the body.
  Cartier replica watches
  This is because the luminous watch dial pointer and painted luminous material, mainly a mixture of radium and zinc sulfide, radium rays can stimulate the release of the zinc sulfide crystal light, sleep, if wearing a sheet, the body would be eight to nine hours of radium radiation on the human body has certain hazards. Therefore, before going to sleep, it is best to take down the luminous watch, put on the table.
  Bell&Ross; replica watches
  5. Electronic watch tips.

  Electronic watch 25 ~ 28 ℃ in temperature when a timing error in a second or less day and night, when the temperature is below 0 ℃ to 50 ℃ or above, two seconds slower every day and night. At the same time when the temperature is as high as 60 ℃, the LCD panels will be black, the temperature dropped below 0 ℃, the liquid crystal display panels will lose the role, so that by winter, electronic watches can only be worn on the wrist, by the body’s temperature to keep it the normal time. In addition, the high temperature and too low will cause leakage, corrosion movement.
  Hublot replica watches
  Electronic watch batteries generally available more than a year, but the lighting power consumption, bright open a second time the power consumption equivalent to more than one hour. After the battery faster, the lights become dim, or dim the digital display is turned on or even disappear. When replacing batteries, repair the table if they do not understand technology, table repair shop should be installed. The battery size is not standardized, many batteries of various brands and can not use.
  Burberry replica watches
  Electronic watch to note: press the button can not be too hard to avoid failure; LCD panels use an additional five to seven new ones; battery is discharged to promptly remove, in order to avoid corrosion fluid flow movement. Found that light does not shine, button failure, timing error of a sudden have more time to repair may be bad soldered joints or took off.
U-BOAT replica watches
Electronic watch, especially the digital electronic watches, water resistance is generally poor. While some in the manual or printed on the back cover “water” words, we should try to avoid contact with water.
  Electronic watches, mechanical watches with different structures, are electronic circuits and electronic components, the event into the water, would be “disastrous”, and watch the whole scrap. In particular, LCD panels and integrated line, not only afraid of the water is affected by the influx over time will fail. Therefore, the wash, laundry is best to come off the table. To prevent splash water when it rains. If you find that digital watches into the water, or watch-glass wall together with water vapor, should immediately repair shops in addition to the water table, row wave treatment.

Replica handbags and replica watches shop

From my point of view, just like any other kind of machines, watches also need regular service and oiling to continue running effectively.