Print Email RSS RSS  Share del.icio.us Facebook Twitter
Rise of the Jedi Theater
Instead of cluttering his Star Wars-themed theater with memorabilia, this homeowner went to the dark side and had it modeled after Chancellor Palpatine's office.
image
SILVER WINNER: Best Themed Theater
Slideshow and Related Content
image
View Slideshow

June 16, 2009
by Steven Castle

The theater has four “windows”: two on one side, one on the other and one in the back, each showing a portion of the city. Behind the faux windows, fabric walls and columns are acoustical materials such as absorptive panels near the front of the room and diffusive and reflective panels at the rear. Other techniques to prevent sound from escaping to the nearby neighbors include 6-inch staggered-stud walls on two sides that are filled with fiberglass insulation (two other walls are made of concrete blocks), isolation bumpers on the riser and stage to prevent vibration transfer, and bass traps in the soffit to absorb unnecessary booms.

The columns and sconces are mostly constructed of MDF board and finished with an automotive paint for a high sheen and depth, Schafer says.

Putting the equipment in the room was the work of Ocampo and DreamSpace. The installer chose a Marantz single-chip DLP 1080p projector and a 103-inch Vutec 16:9 screen with horizontal masking, accompanied by powerful Anthem processing and amplifiers and an array of B&W speakers and Velodyne subs.

Two of B&W’s remarkable 45-inch-high 802 speakers flank the screen behind black fabric, with a B&W 800-Series HTM2 center channel matched to them and two Velodyne DD-10 10-inch subs below. Atop the side columns near the seats and in the trapezoidal-shaped crowns are B&W DS8 dipole speakers that fire to the front and rear for better ambient sound effects. Two B&W SCMS speakers are located in the boxed structures on either side of the projector to complete the 7.1 system.

“Steve is very fond of B&W speakers, and the 802s are amazing,” says Ocampo. DreamSpace is using Anthem’s Statement D2 processor and Anthem’s P5 multichannel amp for five channels in the surround system, as well as the P2 amp for the two main front channels, each delivering 325 watts per channel. “The Anthems drive the speakers very nicely,” he adds. Just imagine a spacecraft chase or light saber duel with that kind of juice.

The Middle Atlantic rack is cleverly concealed behind a hidden door in the left wall (below). It’s all controlled by an RTI T3 touchpanel remote that also operates the room’s Lutron Grafik Eye lighting control system. The rack is vented by an Active Thermal Management system. Audio/video enthusiast Simon liked working on the project so much, he started his own Miami-based A/V installation company, Home Imagineers.

All in all, the year-and-a-half project took a bit longer that anticipated, but don’t all worthwhile sagas?



Steven Castle - Contributing Writer
Steven Castle is Electronic House's managing editor. he has been writing about consumer electronics, homes and energy efficiency topics for two decades. He is also the co-founder of GreenTech Advocates.


Equipment List

  Find an Installer
  Find custom electronics installers who provide home theater systems,
  lighting, home automation, A/V and more! Click here to get started.

Display
Marantz VP11S2 DLP Projector
Vutec 103-inch XFH Screen

Speakers
B&W HTM2 Center Channel
B&W 802 Front Channels
B&W DS8 Side Channels
B&W SCMS Rear Surrounds
Velodyne DD10 Subwoofer (2)

Other
Anthem Statement D2 Processor
Anthem P5 Multichannel Amplifier
RTI T3 Universal Controller
Lutron Grafik Eye Lighting
Middle Atlantic AXSX Equipment Rack

Room Design
CDGi, Boca Raton, FL, www.cinemadesigngroup.com
Electronics Installation 
DreamSpace, Miami, FL, www.dreamspace.us



Article Topics
What's Related
Popular Tags
Social Bookmark   less


Comments (6) Most recent displayed first.
Posted by Marcus Grant  on  02/06/09  at  07:12 AM

Hi Marcus here again, thanks for replying and i am very interested in this, i do basic Home Cinema set ups, but there is alot of this that can help me on creating my own for a part of my house that i am doing this year, so if you can help me through this, i will be helpful in trying to get maybe some kind of work between us if someone sees mine in my house then i can show clients and take it from there, 1st thing is a list of tools, materials and costs for something like this. what if i wanted something similar where would i get the moulds like in star wars other theme, this is amazing and if i could do something similar that would make it all the better…
thanks again

Posted by Steve Simon  on  10/17/08  at  08:16 PM

Marcus, email me at .(JavaScript must be enabled to view this email address)

Posted by Marcus Grant  on  10/15/08  at  05:22 AM

Hi marcus Grant here, I love everything you have done here, and i would love it if you could help me… i need some tips and design help, where did you get the materials, design fabrics, what tools, can you give me a step by step on how it was assembled.. i would like to do something simliar for myself… just to get the know how would be fantastic…

marcus

Posted by Marcus Grant  on  10/15/08  at  05:19 AM

i just love the whole design and theme here, my question is one that i would love the answer, Where would you get the props, material used for the ceilings and sides, any tips on how to do something similar.  How would i go about it.  Can you give me a list of things to do and get…

cheers
marcus

Posted by Andrew Trask  on  10/10/08  at  10:08 AM

Great to see this theater get some attention!

It was great working with Steve on this project and to see all the imagination come to life.  He really has something special in his home.

The city landscape imagery that is printed on the fabric was indeed created from scratch. 

Every single building was modeled and rendered in 3ds max.  The final pixel dimensions for the entire image was 27,617 x 2839 px.  This was a huge challenge to pull off as the output limits with 3ds max on a desktop computer (powerful, but still a desktop) hover around 3300 x 2550 px.

Lots of scripts and plug-ins and frustration was needed, but in the end it was all worth it.  The final print is very crisp for its size, and it really completes the immersion of the theater. 

If there are any 3d artists out there who are having trouble with large format renderings and need some advice, feel free to drop me a line.  I also have some of this project documented online -do a search for ‘silky pixel theater’ and it should come up.


+ View all comments on for this article



Commenting is not available in this weblog entry.