Procella Audio Starts Shipping P6V Speaker

image

Designed for small and medium rooms, the P6V can be used for main and surround channels.


Jul. 09, 2012 — by .(JavaScript must be enabled to view this email address)

Procella Audio is putting another speaker into its lineup—and it’s ready to multitask. The new P6V Loudspeaker is designed to work as your room’s main and surround channels, in a tall profile enclosure.

This two-way L/C/R and surround channel speaker also promises professional performance, via a 1-inch high-frequency compression driver mounted on a Procella-designed constant directivity waveguide, a high-output 6.5 inch woofer, and a Procella Identical Voice crossover.

Promising THX cinema reference-level playback (105dB continuous), the speaker is designed for small- and medium-sized rooms. The company also says that the P6V’s bass extension meets the requirements for the 80Hz Home THX standard subwoofer crossover point.

“The P6V brings a new form factor to the Procella speaker lineup,” said Procella partner Chuck Back. “Using the identical components as our highly successful P6 main/surround speaker, the tall profile of the P6V gives integrators and home cinema enthusiasts a more traditional American look, with a narrow width that enables the speaker to be concealed in architectural columns when used as a surround channel speaker. Delivering the same performance as the original P6, the P6V is a compact high-performance speaker that is an ideal L/C/R speaker in small to medium rooms, as well as a surround in all but the largest home theaters.”

At 18.5 inches high, 11.4 inches wide, and 4.9 inches deep, the P6V can be wall-mounted near a flat panel or behind an acoustically transparent screen. The P6V is available now via authorized Procella dealers and distributors worldwide, with an MSRP of $1,599 each.



Return to full story:
http://www.electronichouse.com/article/procella_audio_starts_shipping_p6v_speaker/