Minimum Intrusion, Maximum TV

image

Bronze Winner: Family/Media Room

A mega plasma TV and creatively-placed speakers create the perfect family center.


May. 12, 2011 — by .(JavaScript must be enabled to view this email address)

Big TVs can be a pain. Even flat-panel displays can take up a lot of space and protrude from the wall a few inches, interfering with the clean, uncluttered look of a modern minimalist decor.

That’s something that the owner of this New York City apartment couldn’t live with. He wanted a living room that looked like a living room—yet he also wanted a big, cinematic video experience.

Under the guidance of Piscataway, N.J.-based Electronics Design Group (EDG), the homeowner selected a whopping 85-inch plasma display by Panasonic. This TV is bright, allowing for viewing in all lighting conditions, which was necessary in a living room where the family doesn’t want to dim the lights to enjoy the picture.

So what does it take to mount a plasma the size of four 42-inch TVs and not make it look like a beast? “There was a ton of reinforcement work that needed to be done,” says Ross Anderson, senior project manager for EDG. Plasma TVs are heavy, and an 85-inch plasma is one of the heaviest, so reinforcing the wall to bear the 250-pound TV was a challenge. In addition, the homeowner wanted the TV to be mounted flush with the wall. The builder, Rich Churchill, designed a 14-inch-deep recess in the wall to accommodate both the TV and mounting hardware. Electrical lines had to be rerouted, and there needed to be enough space to allow for the connections. “He also created a shroud that keeps you from seeing back to where the mounting portion is,” says Anderson.

Due to the open design of the room—it connects to a dining area and a ceiling that rises from 9 feet in the TV area to 14 feet behind the sofa —speaker placement and audio decisions required some creative solutions. The main left, center and right B&W CT7 speakers were built into a custom cabinet, which also houses most of the components under the television. The rear speakers, B&W VM1 monitors, were mounted directly over the viewers’ seating position, on the wall that rises from the lower to higher ceilings. These are fairly large monitor speakers that can be mounted vertically or horizontally. In this case, EDG mounted them horizontally to blend with the ceiling lines. From the living room area, they’re not even noticeable.  An active B&W 500-watt subwoofer is also hidden out of sight on the floor behind a couch.

All of the living room speakers are driven by a Rotel 100-watt-per-channel home theater receiver.

The dining area, adjacent to the living room so diners can view the big TV from the dinner table, has two of its own B&W M1 speakers and is wired as a second audio zone.

System Design & Installation
Electronics Design Group, Piscataway, N.J. www.edgonline.com
General Contractor
3A Painting, 718-468-9924
Woodworker
Rich Churchill Woodcraft, 917-519-9980
Find an Installer
Find custom electronics installers
who provide home theater systems,
lighting, home automation, A/V
and more! Locate an installer today!

Of course, being the family’s living room, this space isn’t just for home theater. A Control4 multiroom audio system supplies music to the room as well as the rest of the house. The system accommodates four iPod docks so the whole family can tap into the music of their choice.

While it was perfecting the living room, EDG also upgraded the audio and video systems in the rest of the house. This included new wireless and wired networks. EDG used a wired network for the control system to ensure reliability.

The home’s bedrooms were outfitted with B&W in-ceiling speakers, iPod docks and Control4 touchscreens. While not yet completed, the bathroom is scheduled to get the treatment in the form of a 4-inch Control4 touchscreen and a Control4 two-way in-ceiling speaker.

The family controls the audio and video system for the living room with a Control4 SR250 remote. Separate 3.5-inch touchpanels throughout the apartment let the owner control the music in other rooms. EH


Products
1) Control4 C4-HC500-E-B Home Controller HC-500 w/remote
1) Control4 AVM-16S1-B Audio Matrix Switch-16
1) Control4 C4-16AMP3-B Multi Channel Amplifier
1) Control4 C4-IPDKTT1-E-B iPod Dock
1) Control4 C4-TUN2-E-B Multi-tuner V2
1) Control4 C4-XMOD XM Module for Multi Tuner V2
6) Straight Wire MCA00175 1.75 M MUSICABLE II Analog Interconnects Level I
4) Straight Wire MCA0040 4.0 M MUSICABLE II Analog Interconnects Level I
1) Integra CDC-3.4 6-Disc Carousel changer
2) Intelix AVO-V1A2 Single composite video and stereo audio balun
1) Linksys SRW2024P Managed Gigabit Ethernet Switch PoE with WebView
1) Linksys WRVS4400N Wireless-N Gigabit Router with VPN
3) Furman Elite-15i Linear filtering AC Power Conditioner, 6-15 Amp Outlets
1) CS Client Supplied Custom Audio Cabinet

Living Room Surround
1) CS Client Supplied Pioneer Elite 60" Plasma Monitor
1) CS Client Supplied HD Cable Box w/ DVR
1) Rotel RSX-1550 Home Theater receiver w/100 watts x5 channels (supports 7.1-add amplifier) HDMI v1.3a portsmx4 Faroudja Video Processing
1) Straight Wire MCA0040 4.0 M MUSICABLE II Analog Interconnects Level I
2) Straight Wire CTOS20 2.0 M - CONX - HTS Tos-Link Optical Digital
1) Control4 C4-HC300-E-B Home Controller HC-300 w/remote
1) Samsung BD-P3600 Blu Ray DVD Player w/netflix
2) Bafo HDMI-HDMI-2M 2m HDMI Cable,,
3) B&W CT7.4-LCRS 2 Way Custom LCR with 2x6" kevlar Cone Driver and 1" Dome Tweeter - Grille Available as Option
2) B&W VM-1PW 2 Way shield vented montior for vertical or horizontal mount (bracket included) - pearlescient white
1) B&W ASW610XPB Active closed box subwoofer with 10" Driver - 500W amplifier - black ash

Kitchen
1) Control4 TSE-3.8C2-W PoE Mini Touch Screen - 4" White
1) Control4 AC-RWB3.8-G Color Touchscreen
1) Samsung LN26B360C5DXZA 26" HD TV w/built in tuner (piano black cabinet)
1) Chief FSRV VESA Universal Static Mount
2) B&W CCM816 In-Ceiling 2-way 6.5" woofer 1" metal tweeter flush mount
2) B&W BB-C6 Metal back box for the CCM816

Dining Room
2) B&W VM-1PW 2 Way shield vented montior for vertical or horizontal mount (bracket included) - pearlescient white

Installation Info
Systems Design & Installation:
Electronics Design Group, Piscataway, N.J., http://www.edgonline.com
General Contractor: 3A Painting, 718-468-9924
Woodworker: Rich Churchill Woodcraft, 917-519-9980

Project Details
Room Size (L x W x H):
40 x 20 x 9–14 feet
Cost: approximately $30,000 (includes installation and labor)
Project Duration: 4 months
Construction: Retrofit


Return to full story:
http://www.electronichouse.com/article/minimum_intrusion_maximum_tv/C425