The machine that is Integra keeps pouring out the A/V gear. This week the company is rolling out a number of new networked-capable audio/video receivers designed for the custom home theater/media market.
All four new receivers, the DTR-20.3, DTR-30.3, DTR-40.3 and DTR-50.3 are all THX certified and include a suite of networking features.
On the video processing side, the new DTRs include Marvell’s Qdeo 4K upscalling. The DTR-50.3 goes a little further by adding an IDT HQV video processor. With that you get detailed ISF calibration controls and a lot of upconversion power.
The DTR-50.3 and 40.3 include Audyessy’s MultEQ XT processing for correcting room acoustics. They also include Dolby Volume to keep listeners from getting blown away by excessively loud commercials.
The systems all have mongo networking capability, with Window 7 and DLNA certifications, plus access to streaming services from Mediafly, Pandora, Slacker, Napster, Rhapsody, vTuner, SIRIUS XM Internet Radio, and, on the DTR-40.3 and DTR-50.3 only, Last.fm. Unfortunately you’ll need an USB Wi-Fi adaptor to go wireless, but they all include an Ethernet port for good, old-fashioned wired connections. Front USB ports also can be used for an iPod dock.
The entry-level DTR-20.3 is a 5.2-channel unit 8-ohm rated at 90-watts per channel; the DTR-30.3 is a 7.2-channel system 8-ohm rated at 100 watts per channel; the DTR-40.3 is a 7.2-channel system 8-ohm rated at 110 watts per channel; and the DTR-50.3 is a 7.2-channel system 8-ohm rated at 135 watts per channel.
To make these products easy for processional installers to integrate into home systems, each unit includes bi-directional Ethernet and RS232 ports for control, 2 IR inputs and 1 out, 3 programmable 12-V triggers, non-volatile and lockable dealer settings, firmware updates via Ethernet and USB, Overlaid Graphical On-Screen Display (OSD), and GUI Navigation via HDMI. The DTR-20.3 has Zone 2 preouts with independent volume, bass, treble and balance controls. The DTR-30.3 adds powered Zone 2, the DTR-40.3 adds Zone 2 video, and the DTR-50.3 adds zone2/3 preouts. The DTR-50.3 also includes a bidirectional, preprogrammed, and customizable remote controls with on-screen set-up, mode-key LEDs, and Macro presets for four activities.
Pricing for the new units begins at $600 for the entry level, up to $1,400 for the 50.3.
Follow Electronic House
Grant Clauser has been covering home electronics for more than 10 years with editorial roles in several consumer and trade magazines. He's done ISF-level damage to hundreds of reviewed products and has had audio training from Home Acoustics Alliance and Sencore. He's also the author of the book The Trouble with Rivers
. Follow him on Twitter @geclauser.